Οι δέσμες PHOTON συμβάλλουν στην ολοκλήρωση ενός αυτόματου και ασφαλούς συστήματος γκαραζόπορτας ακόμη και για τις πιο απαιτητικές εγκαταστάσεις.
DESCRIPTION
Power Supply 12 – 24V DC/AC
Power Consumption Transmitter 21mA
Receiver 43mA @ 12V
Maximum Distance 40m
Alignment Automatic – 9m² @ 10m (parallel – circular area)
Output Contact Rating 5A @ 220V AC (non-inductive)
Operating Temperature -15°C to +55°C
Operating Humidity 0% – 90% (non-condensing)
Degree of Protection IP54
Ασύρματη έκδοση: Με χρήση του ασύρματο πομπού δεν χρειάζεται να οδηγήσετε επιπλέον καλώδιο για σύνδεση με τον δέκτη.
Πολύ απλά ευθυγραμμίζετε, στερεώνετε και φύγατε
Power supply Transmitter: 2 x AA Alkaline
batteries (supplied)
Receiver: 12V – 24V AC
12V – 30V DC
Only replace with alkaline batteries; do not use rechargeable batteries with this product
Circular area – assuming a parallel surface
Selectable by jumper
Power consumption Receiver: 30mA @ 12V DC (relay) , 15mA @ 12V DC (open collector)
Transmitter battery life Minimum of two years
Battery low indication Audible beep
Maximum operating distance 10m
Alignment Automatic – 1m² @ 10m
Output contact Fail safe, N/C and N/O potential-free, N/C open collector
Output contact rating 3A @ 30V DC non-inductive/ 50mA @ 30V DC (open collector)
Operating temperature -15°C – +65°C
Operating humidity 0 – 90° non-condensing
Housing material ABS
Degree of protection IP54
To FLUX SA είναι ένα αυτόνομο σύστημα ανίχνευσης, μονού καναλιού μεγάλης ευαισθησίας σχεδιασμένος για ανίχνευσης πρόσβασης οχημάτων.
DESCRIPTION
Operating Voltage 10 – 40V DC, or 7 – 28V AC
Standby Current 50mA
Output Relay Rating 1A @ 125V AC
Detection Time 4ms @ 100kHz loop frequency | 10ms @ 40kHz loop frequency
Visual LED Indicators Showing Power; Loop Fault; Loop detection level (five LED’s); Detect
Audible Indicators Buzzer with indication of loop detection level and loop fault
Weight 92g
Detector Tuning Range 15 – 1500μH
Electronics Protection Insolation transformer with 10kA lightning protection
Dimensions 105mm (length) X 60mm (width) X 26mm (height)
DESCRIPTION
Power Supply Transmitter 2 x AA Alkaline Batteries (Supplied) Only replace with alkaline batteries; do not use rechargeable batteries with this product
Receiver 12 – 24V AC 12 – 30V DC
Receiver Power Consumption 30mA @ 12V DC
Transmitter Battery Life Minimum 2 years
Battery Low Indication Audible Beep
Specified Operating Distance 30m
Alignment Automatic – 1m² @ 10m (circular area – assumes parallel surface)
Output Contact Fail-safe, N/C and N/O, potential free contact
Output Contact Rating 3A @ 30V DC Non-inductive
Operating Temperature -15°C – +65°C
Operating Humidity 0 – 90° Non-condensing
Housing Material 0 – 90° Non-condensing
Degree of Protection IP54